Tips For Replacing a Window Handle
It is easy to change your window handle from the comfort of your home. Follow these handy tips for smooth operation and a stunning appearance.
Begin by removing the screws to expose the screws inside the uPVC window handle. Then, measure the length of the spindle to ensure that you receive the correct size replacement.
1. Measure the Spindle length
If you're replacing a window handle it's important to determine the dimensions of the spindle correctly. This is because it will affect how tight or loose the handle is and whether it will lock correctly in the frame of the window. The spindle is the steel shaft that connects to the handle and to the lock in the window frame. The spindle is available in either the standard cross-section of 8mm for industry or the older versions of 9mm. The current industry standard is 8mm, but this wasn't always the case so when buying a new handle it is essential to verify the measurements.
Remove the handle. This is easily done by turning the handle in the open position and unscrewing two screws that hold the handle in place (which are usually hidden behind plastic caps that will need to removed). After removing the handle, you can measure from the base of the handle until the end of the spindle. This will provide you with the measurements needed to purchase a replacement.
There are plenty of options when it comes to selecting the right window handle from sleek chrome that blends into a contemporary home to traditional brass with a burnished finish that looks great in restored Georgian rooms, or the more classic Tudor cottages with curled monkey tail locks! The options are endless but the most important thing is to choose a style that complements your home.
Espag handles are typically used to uPVC window frames and are always the exact same size with a 43mm center. Cockspur handles can vary between 58mm and 62mm, but there are replacements for both sizes. Cadenza window handles have distinct dimensions due to their bent blade that is used to operate a multi-point lock mechanism inside the window.
When selecting a window handle take into consideration the hand you use to open your door. Inline espag window handles are not hand-operated and can be used for left or right handed windows. Cranked window handles are only compatible for windows that open in one direction.
2. Take the handle off
Whether the handle is damaged or just worn out the handle of a window that is shattered is a major source of frustration. However, the good part is that replacing the uPVC window handle is a straightforward task that you can complete yourself. You will require only the most basic hand tools and some time to complete the process.
You will need to first open the window and ensure that it is not locked. The next step is to remove the screw caps that hold the handle in position. After these have been removed, you are able working on the removal of the handle itself.
The handle is connected to a spindle inside the window frame. Depending on the type, this is held in place either by a screw or pin. The most popular types of handles are inline Espagnolette handles and handles with cockspurs. Both types of handles are found on casement windows including aluminium ones. They can be locked using keys to prevent the opening of the window from outside or you can lock them by turning the handle clockwise.
To take the handle off, you will require a flat-bladed screwdriver. After the clip has been released, the handle will slide off the spindle. After the handle has been removed, you will be required to measure the length of the spindle to ensure that your new handle is compatible with the spindle's length.
Once you've determined the correct size for the handle, you can screw it into place. It is essential to make sure that the handle is securely attached and rotates in the proper direction (clockwise when the handle is open or counterclockwise if the handle closes). It is important to make sure that the handle has not been placed upside down.
Replace the cap screws. Once you have done this you can test the handle to confirm that it works properly. You can also test the locking mechanism by moving the handle from the unlocked position to the locked position and back.
3. Remove the Screws
A uPVC handle is an important component of any house and is the first thing to show signs of wear or damage. This can be due to natural factors, regular usage, or even deliberate damage by criminals looking to gain access to your home. A simple fix can resolve the issue and prevent it from happening again.
UPVC handles may also be difficult to open when the locking mechanism isn't working properly. door handle repair near me repairmywindowsanddoors is often possible to fix the issue by replacing the multipoint locking mechanism rather than the entire handle. This can save you money.
Once you've removed the old handle you'll need to remove the screws fixing it to the base. They are usually located on the inside face of the base. It is possible to use a screwdriver do this. Be careful not to tighten too much the handle, as this can cause it to become loose.
You'll then have to locate the fixing pins or screws that hold the new handle in the correct position. Again these are likely to be located on the inside face of the base of the handle. you will need to use a screwdriver or a pair of pliers to remove the screws. If you'd like to replace them, you should replace the caps on the screw and test the handle to make sure it functions properly.
Install the handle by aligning the spindle with the window's cutout mechanism. Then screw it in. If you want to replace the screw covers make sure that the handle is in a position that is open and that any screws are securely fixed. After this is done, you're all done and you can enjoy your new window handle. This should allow you to avoid costly door and window replacements in the near future. Contact us if you require more information about this or any other aspect of your uPVC window.
4. Install the New Handle
The procedure of replacing a damaged window handle or updating it is easy and can be completed within only a few simple steps. The key is to identify the type of handle, determine its spindle and identify the tools you will need to complete the task. Always consider security when working with windows and tools. Make sure you follow the steps and make sure that you have a handle that is safe for use.
The first step is to find the screws that hold your existing window handle in place. Then, remove them, while keeping an appropriate grip on the handle itself to stop it from crashing and result in injury. Once the screws are removed, you can place them in a secure location to be replaced in the future.
After removing the old handle, you can begin to put in your new one. The handle should be a perfect fit for it to function properly and hold the window in its closed position. Then you need to slide the square metal bar on the handle into the window mechanism hole.
After your new handle is installed, the final thing to do is replace the screw caps and verify that it functions. If you're not happy with the results or the window doesn't shut or open properly, call our experts for assistance.
Almost all UK homes have uPVC Windows. Therefore, a large number of windows will require replacement at some point because of wear and tear or breakage. Anyone with a bit of DIY knowledge can complete the task. The most crucial aspect to the success of this procedure is ensuring that you're using a handle that is compatible with your window's size and design. If you're not sure what type of handle you require, don't hesitate to contact our team who can help you navigate the various options available.